The 8BitDo Pro 2 works with the Nintendo Switch, Android, Windows, Mac, Steam and on Raspberry Pi both wirelessly via Bluetooth or wired via a USB C to Type-A cable that comes with. The controller serves up 20 hours of playtime with a rechargeable 1000 mAh built-in battery pack with 4 hours of charging time.
8BitDo Pro 2 setup on Nintendo Switch
Bluetooth1. Turn the controller on its back and toggle the mode switch to S2. press Start to turn on the controller. The LED will blink from left to right 3. 3. Press the pair button at the front of the controller for 3 seconds to enter its pairing mode. LED stops blinking for a short moment thenstarts blinking again (this is required for the very first time only)4. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order5. The LED becomes solid when the connection is successfulNote: The controller will auto-reconnect to your Switch when you press Start once it has been paired. Wired connection1. Turn the controller on its back and toggle the mode switch to S2. Press Start to turn on the controller. The LED starts to blink from left to right.3. Connect the controller to your Switch dock via its USB cable4. Wait till the controller is successfully recognized by your Switch to play. *The Switch system needs to be 3.0.0 or above for wired connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication. The LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2,4 is the maximum number of players the controller supports.
8BitDo Pro 2 setup on Windows PC
Bluetooth connection1. Turn the controller on its back and toggle the mode switch to X2. Press Start to turn on the controller. LEDs 1 & 2 start to blink3. Press the pair button at the front of the controller for 3 seconds to enter pairing mode. The LED starts to blink rotate from left to right (this is required for the very first time only)4. Go to your Windows Settings > Devices > Bluetooth & other devices and toggle on Bluetooth5. Choose Add Device > Bluetooth > 8BitDo Pro 26. The LED becomes solid when the connection is successful The controller will auto-reconnect to your Windows device with the press of start once it has been pairedRequired system: Windows 10 (1703) or above. Bluetooth 4.0 is supported Wired connection1. Turn the controller on its back and toggle the mode switch to X2. Press Start to turn on the controller. LEDs 1 & 2 start to blink3. Connect the controller to your Windows device via the included USB cable4. Wait till the controller is successfully recognized by your Windows device to play *The LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2. 4 is the maximum number of players the controller supports
8BitDo Pro 2 setup on Android
Bluetooth connection1. Turn the controller on its back and toggle the mode switch to D2. Press start to turn on the controller. LED 1 starts to blink3. Press the pair button at the front of the controller for 3 seconds to enter pairing mode. The LED starts to blink from left to right (this is required for the very first time only)4. Go to your Android device’s Bluetooth setting, pair with [8BitDo Pro 2]5. The LED becomes solid when the connection is successful • Required system: Android 4.0 or above• The controller will auto-reconnect to your Android device with the press of start once it has been paired Wired connection1. Turn the controller on its back and toggle the mode switch to D2. Press Start to turn on the controller. LED 1 starts to blink3. Connect the controller to your Android device via its USB cable4. Wait till the controller is successfully recognized by your Android device to play *OTG support is required on your Android device
8BitDo Pro 2 setup on macOS
Bluetooth connection1. Turn the controller on its back and toggle the mode switch to A2. Press Start to turn on the controller. LEDs 1 & 2 & 3 start to blinkis required for the very first time only)3. Press the pair button at the front of the controller for 3 seconds to enter pairing mode. The LED starts to blink rotate from left to right (this is required for the very first time only)4. Go to your macOS device’s Bluetooth setting and turn it on5. Pair with 8BitDo Pro 2 [Wireless Controller]6. LED becomes solid when the connection is successful Required system: OS X Lion (10.10) or aboveThe controller will auto-reconnect to your macOS device with the press of start once it has been paired Wired connection1. Turn the controller on its back and toggle the mode switch to A2. Press Start to turn on the controller, LEDs 1, 2 & 3 start to blink3. Connect the controller to your macOS device via the included USB cable4. Wait till the controller is successfully recognized by your macOS device
